EastTNhunter67
Member
Anyone work up something with 100 grain barnes TTSX?
-
Help Support TNDeer:
25-06 loads
- Thread starter EastTNhunter67
- Start date
Maude
Well-Known Member
My Rem 700 shoots the 100gr TTSX really well with 50.3 gr IMR4350 and CCI-200s at 3.224"OAL. I honestly can't remember how far off the lands that is. I swapped to this load last year when I was unable to buy any 110 gr Accubonds and it's a hammer on deer.
EastTNhunter67
Member
Appreciate the info. Looking forward to seeing how the TTSX will group.
- Joined
- Jul 16, 2015
- Messages
- 3,179
I did a quick work up summer 2021 for a new gun so I could carry it a little. At the time, all I could find was some 100gr tsx that a buddy had. The load was .050" off the lands with a COAL of 3.135" 51.8gr imr4350.
mr.big
Well-Known Member
No telling how many rounds of 25-06 I have shot with 100 gr bullets and a max load of imr4831.
With a 26" bbl it's a lot faster than 4350
With a 26" bbl it's a lot faster than 4350
EastTNhunter67
Member
My barrel is 22 inch. I bought a savage axis from academy sports and since have put on a boyds stock, swapped out a trigger spring.
I have shot Hornady Whitetail hunter 117 gr interlock. Bought these online for a good price and they shoot well out of the rifle.
Just gonna try to get a good group out of 100 gr TTSX. Maybe will be less bloodshot damage.
I have H4350,H4831sc,Norma MRP and reloader 22 to help with a good recipe.
TiminTN
Well-Known Member
The most accurate powders I tried, and already mentioned that there could be faster powders were IMR 4350 an RL 22 with 100 grain bullets.
