Arrow length???

[ghosthunter]

Do you cut your arrows so that the broadheads will stick out past the riser? Mine don't stick out past the riser and due to the space in that area my broadheads nearly touch the riser. I shoot an MQ-32, so I don't know if this is normal or just the design of this particular bow.

 

[ShaneHallum]

I cut mine so my broadhead is centered with my riser.... Some people like longer arrows.

 

[stik]

i want the broadhead in front of my bow hand.

 

[Double-D-Team]

i want the broadhead in front of my bow hand.

X2... Something to think about...If you hunt all season with a bow and wear gloves like I do, don't cut them to short. Broadhead in front of your bow hand for sure.

 

[ghosthunter]

When you say in front of the bow hand, you do mean that the broadhead should stick out past the riser?

 

[BowGuy84]

I cut mine a quarter inch in front of the rest. This gives me max speed and stiffens the spine up some.

Anywhere from here to an inch or so infront of rest is acceptable

 

[stik]

When you say in front of the bow hand, you do mean that the broadhead should stick out past the riser?

yes

 

[Radar]

I have a riser that is cut away past center . When the centershot is set correctly , I have plenty of broadhead clearance . I cut my arrows about 1.5" inches past the front of the rest .

 

[woodlawnhunter]

we use whisker,quiktune 360 and ultra pro drop aways and we cut length to middle of riser.You MUST , and I repeat MUST keep all parts of hand below riser or may get sliced up w/broadheads. makes for lighter arrow , quicker speed(which we don't shoot for)

 

[Drop 4/5]

I shoot a 30" arrow and will have to see if I need to add 1/2-1" to make sure it clears my hand with a broadhead.