• Help Support TNDeer:

bow sight in question - need help

T

taximan

Well-Known Member
Joined
Dec 19, 2009
Messages
1,530
Reaction score
2
Location
Indiana
When I shoot at 20 30 and 40 yards I am consistantly two inches high and 1 inch to the left. Even if i adjust the pin I still get the same result. Now I have learned to compensate for it and taken deer with that setup but I vowed this year to fix the situation. but for the life of me i cant figure it out. I anchor to same point, use peep sight, I use a release and a whisker biscuit rest. My sight has a level on it so i know that im not holding the bow off to one side. Any thoughts or suggestions? I shoot bow at 58 lbs and use 2117 easton gamegetters. 100 grain 3 blade muzzy's. draw is 28 inches.
 
i thought the vanes had to go through the black bristles? will try the broadhead tuning....thanks
 
stik said:
ditch the biscuit for a good drop-away.
Click to expand...

Bad advice. His next post will be "how do I set up a drop away".

The whisker biscuit is as easy as it gets. Especially for hunters/shooters that do not spend alot of time with their bow.
 
richmanbarbeque said:
stik said:
ditch the biscuit for a good drop-away.
Click to expand...

Bad advice. His next post will be "how do I set up a drop away".

The whisker biscuit is as easy as it gets. Especially for hunters/shooters that do not spend alot of time with their bow.
Click to expand...

:D
 
Bertman said:
Nothing wrong with the wisker buscuit.been using it for 4 years won't trade it for anything else.
Click to expand...

that just it. you either love it or hate it. couldn't get it off my bow fast enough.
 
Your left and right issues are most likely the result of a level that's not level. Loop a string through the top cam and hang it in a doorway. Now look at your level. Would almost bet money that it's off. Most are from the factory, and unless you have a a second axis adjustment there's really no way to fix it other than shims. On the up and down issues, keep moving the pin up until you meet your impact point.
 
taximan said:
When I shoot at 20 30 and 40 yards I am consistantly two inches high and 1 inch to the left. Even if i adjust the pin I still get the same result. Now I have learned to compensate for it and taken deer with that setup but I vowed this year to fix the situation. but for the life of me i cant figure it out. I anchor to same point, use peep sight, I use a release and a whisker biscuit rest. My sight has a level on it so i know that im not holding the bow off to one side. Any thoughts or suggestions? I shoot bow at 58 lbs and use 2117 easton gamegetters. 100 grain 3 blade muzzy's. draw is 28 inches.
Click to expand...

Move your rest to the right and string loop up in 1/16" increments. Whisker Biscuit rests are very easy to tune.
 

Latest posts

Back
Top