KENBOB10
Well-Known Member
Was wondering if I could float Candy Fork with a 14 foot Jon boat? I realize they will have to be generating for this to be a possibility. Just don't know how deep the water is.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Caney Fork?
- Thread starter KENBOB10
- Start date
stik
Well-Known Member
plenty of water for it.
KENBOB10
Well-Known Member
Thanks Stik.
stik
Well-Known Member
we did it several years back
KENBOB10
Well-Known Member
Ok. Thought I might go over on the ROR and fish and meet some friends.
I, personally, wouldn't be on there if they were running 2 generators, but anything 1 or under would be OK. With 0 generators there will be a couple of places you might have to get out and drag.
KENBOB10
Well-Known Member
That would be a problem scn. I can get in the boat and drive the boat, but not drag the boat. Is it too dangerous with two running? I do it on the Hiwassee.
stik
Well-Known Member
KENBOB10 said:That would be a problem scn. I can get in the boat and drive the boat, but not drag the boat. Is it too dangerous with two running? I do it on the Hiwassee.
the caney fork is a narrow ditch compared to the hiwassee. 2 generators is a LOT of water.
KENBOB10
Well-Known Member
Ok, thanks.
Savage
Well-Known Member
Floated it without them generating in one. Took a long time but got it done.
