Carbon fury 4560

[Artemas]

I use the redhead carbon fury 4560. This year I got into fletching my own. I got a straight Arizona ez fletching jig which is what the guy at basspro told me would match what the factory fletchings were. After doing 6 and shooting them something felt off. I compared the stock arrow with the refletched and to me it seems like the factory is a 3 degree left helical. The box just says 3 offset 4" dura vanes. Anyone know the anawer? Left, right, center, 1 or 3degree????

 

[REN]

i would assume they were right helical (more common then left) with a minor offset. someone else may be able to go more into that if i am incorrect.

however i will say i would take anything you hear from bass pro with a HUGE grain of salt.

if you are shooting anything other then a biscuit then you may want to look more at an offset or helical then a straight fletch. Straight is great out of a biscuit but once i switched to a ripcord the helical flew much better then the straight.

 

[Buck Assassin]

When I shot carbon furys they had a right helical. This was with 2in blazers.

 

[Artemas]

For anyone that cares for the info, this is what reply I got from carbon express on these arrows.

"Our arrows are factory fletched with a 2 degree straight offset. I
recommend using a Bitzenberger fletching jig with a straight clamp.
When you set the jig center the clamp on the arrow then move the top
adjustment as far to the right as possible."