spitndrum
Well-Known Member
Tndeerguy (Andy) explained to me how to check and see if my bow was outa time, the lil hole on the bottom cam the cable should be directly in the middle, and it looks mine is a lil stretched!
-
Help Support TNDeer:
How to tell if your Reezen is outa time!
- Thread starter spitndrum
- Start date
Tndeerguy (Andy) explained to me how to check and see if my bow was outa time, the lil hole on the bottom cam the cable should be directly in the middle, and it looks mine is a lil stretched!
BigCountry71
Well-Known Member
Shoot it thru paper. Alot of Co. have marks on the cams to show if the bow is in time. I have seen them be wrong as well.
That string should have not stretched that much that quick IMO
That string should have not stretched that much that quick IMO
spitndrum
Well-Known Member
Carlos said:
Yes considering, Andy had this same thing happen and he had it fixed and he is shooting tighter groups now!
Here's a picture from the Mathews tech forum as to how the Reezen cam should look...
Your's really doesn't look that bad. Slightly out, but still pretty close to spec. Your serving is separating a bit. You can push it down with your fingernail and add some superglue to help it remain tight. Every Mathews bow I've had has had serving separation where the cam rolls over.
Your's really doesn't look that bad. Slightly out, but still pretty close to spec. Your serving is separating a bit. You can push it down with your fingernail and add some superglue to help it remain tight. Every Mathews bow I've had has had serving separation where the cam rolls over.
Double Drops
Well-Known Member
Make sure you check all specs on your Reezen with the bow maxed out.
Radar
Well-Known Member
Double Drops said:
Ditto , that goes for the Mathews bows I have owned as well .
