After cleaning up my arrow monday evening i looked at my rage broadhead and it looked different than he other 2. After further examination i noticed i have one 1 1/2 cut and two with 2 inch cut. They must have came that way. Just so happen i picked the arrow with the 1 1/2 cut and shot that deer and it worked just as well as the 2 inch cuts. So if you are having penetration issues you might want to try the 1 /2 cut.
-
Help Support TNDeer:
Rage observation
- Thread starter muddyboots
- Start date
HOOK
Well-Known Member
I had penetration issues and went back to a fixed blade. No more problems.
buckhorn40
Well-Known Member
Rage and many other heads may have width variation from head to head depending on the diameter of the arrow shaft if the blades make contact with the shaft when fully open. I know that the Sidewinder does.
No these are definately 2 differnt heads from the same package. 2 of them are the standard and the other one which i used is the 40 KE with 1 1/2 cut.
Some elk hunters use the 40KE Rage to maximize penetration.
Buck Assassin
Well-Known Member
I didn't know rage made a 1 1/2in cut vesion. That is the main reason I quit using them was lack of penetration. They seem to work pretty good on deer but without a pass through there was never much of a blood trail to follow.
JeepKuntry
Well-Known Member
I've been hearin good things about Redhead Gators. Look just like a Rage, but don't cost a fortune!
