• Help Support TNDeer:

Tactacam battery issue

BigAl

BigAl

Well-Known Member
Joined
Jul 31, 2001
Messages
21,845
Reaction score
2,097
Location
Fayette County, TN US
I ran my first Tactacam cell camera with no issues last year and the batteries easily got me through a whole season. This year bought another. However, the first camera ran through a set of batteries (duracell's) in about a month. I replaced them with another set (different batch of batteries), moved the camera, and they lasted about a month. Meanwhile, the new camera is running on a set of batteries from the same batch and is still at 100 percent.

Cell service is fine in the area and the amount of pics isn't high. Anyone had this type of issue? Anything to try?
 
A month sounds about right for regular alkaline batteries. I run lithiums in all of mine but still have a couple of cameras that used 2 sets a year which gets expensive.

Back a few months ago, I bought 3 of the rechargeable battery packs to rotate through two cameras close to home that are easily accessible. It's worked good so far.
 
BigAl said:
I ran my first Tactacam cell camera with no issues last year and the batteries easily got me through a whole season. This year bought another. However, the first camera ran through a set of batteries (duracell's) in about a month. I replaced them with another set (different batch of batteries), moved the camera, and they lasted about a month. Meanwhile, the new camera is running on a set of batteries from the same batch and is still at 100 percent.

Cell service is fine in the area and the amount of pics isn't high. Anyone had this type of issue? Anything to try?
Click to expand...
I'm on my third Tactacam after having the very same issue with the first two. My solution was to box the bad one up and return to Walmart.
 
I've had issues with using high powered rechargeables in them after the rechargeables became weak. I put some new lithiums in them and it got them working again.
 
Had 2 tactacam out for more than 6 months on regular batteries in low traffic areas .

Have had a couple that ate batteries like that . One needed firmware update and the other one was fried.
Had one that if the batteries were left in the cam was going to catch fire from some type short. All that being said Had better luck with tactacam than other brands .
 
Have had zero luck getting the firmware to update. No matter what I try, get a flashing red status light.
Current Firmware is: 5MR4Cwc203

Guess I'll try the solar panel next.
 
BigAl said:
That's what I'm using. It's just strange that one camera works fine and the rest the other doesn't.
Click to expand...
I thought I had an issue with a couple of my moultrie cameras several years ago Had two that went to firing pics nonstop, batteries went dead a couple days after putting them out with brand new duracells. I hadn't ever had that kind of issue with either of those cameras before and didn't know for sure what caused it. I normally ran energizers but didn't think much of it. Changed batteries in one with the remaining duracells from that pack and put energizers in the other. The camera with the energizers worked fine after, but the camera with the duracells took pics nonstop again until the batteries were pretty well dead. Put energizers in that camera and it worked fine. Still running both of those cameras now but always use energizers.

I don't know what it was with the duracells that caused those cameras to have constant false triggers, but there is no doubt in my mind that those batteries were the issue.
 

Latest posts

Back
Top