# Brace Height: 7-1/8"
# Axle-to-axle: 30�5/8"
Turn your bow down to full poundage (bottomed out). Remember the number of turns it takes to get there so you can return it to the same poundage later. Take a tape measure and measure from one axle to the other. It should be 30 5/8 or very close. If not, your cable or string has stretched. It will take a few twist to your string or cable. If you don't do your own work take it to a respectable pro shop (I personally don't recommend BP) to have it set back to factory specs. Have your specs available for the tech. Checking your specs is a good starting point granted nothing has gotten bumped or moved such as your rest. If your specs are fine check your limbs, cams, and just go over the entire bow. If it was shooting good last season there is no reason why it won't do it again as long as there's not a catastrophic failure such as a broken limb.
Good luck
