95-grain Federal Fusions. Shoot them in two .243's and also use them for my .270.
-
Help Support TNDeer:
243 ammo?
- Thread starter WTM
- Start date
41Magnum
Well-Known Member
I've used the 95gr. Federal Fusions out to just shy of 300 yds and it worked really well as they are a bonded bullet. Complete penetration at that distance. Rem 100 gr Core-Lokts worked equally as well. I've used 85, 95, and 100 gr. Partitions. One worked as good as the other.
PickettSFHunter
Well-Known Member
I just bought a 243 today so was glad to find this thread. I was hoping to load 90gr Sierra game changers because I already have those for 6ARC but I doubt my 1/10 twist rate is up for those.
They may spin, it would be worth a try. The 1/10 twist hamstrings the 243 with some of the longer bullets.
JBM - Bullet Length List
jbmballistics.com
Twist Rate Stability Calculator
Our newly updated Twist Rate Stability Calculator not only tells you what your SG is, but it also lets you know if you are reaching your optimized BC.
bergerbullets.com
I put the bullet length in minus the tip at a velocity of 2900fps and it shows it marginally stable. That said I'm shooting 105's from a 1/9.125" twist with less stability than your formula shows and they punch holes out to 1k.
Be worth a try.
I would definitely give it a try
Wiley
Well-Known Member
95 grain Winchester Ballistic SilverTip is just this side of being from another world in the Remington 700 that I bought for my son back in the 90s. One hole all day long at 100 yards and the most devastating round I've ever taken a deer with.
They shoot almost one hole groups in everything ive tried em in
mayberryrick
Well-Known Member
mayberryrick
Well-Known Member
Yall seriously have me gonna buy a box of the ballistic tips…. I shot them years ago and not sure why I got away from them.
