300BO subsonic loads

[fullstream]

Anyone have any loads that you could recommend? I have H110 & CFE blackout currently. What bullets? Mainly for plinking.
Looking for any and all advice.
Will be shot out of ar with a 16" barrel and a banish 30.
Thanks Steve

 

[Sniper23]

Here's some loading data for subsonic 300blk. There are several options for those powders. It will depend on the bullets you'll be using. I've used those tables when loading 190gr, 200gr, 208gr, and 220gr. All loads have been subsonic and worked great.

https://hodgdonpowderco.com/wp-content/uploads/2023/04/subsonic-data-final-1.pdf

 

[gtk]

My son is trying to work up something for his 300bo.. using CFE and 180g Berry bullets. Will let you know, unless he blows his gun up, as he knows everything and doesn't need advice

 

[fullstream]

Thank you gentlemen

 

[MUP]

LilGun is also a good powder for the 300 blkout I believe

 

[nso123]

It can be a challenge to get them subsonic, even following the load data. Accurate 1680 is a good powder as well. I finally got H110 to work after a whole lot of fiddling with it. I could get it subsonic, but it didn't want to function. I don't remember the load off the top of my head, but it was with a 190 Sierra Match King.

 

[MUP]

Dang Steve, when did you move to Indiana?

 

[fullstream]

Dang Steve, when did you move to Indiana?

4 years ago sir.

 

[MUP]

4 years ago sir.

I just noticed it in your profile! I was going to say I've got some LilGun and AA 1680 if you needed any.

 

[fullstream]

Ordered hornady sub x 190gns. Looking forward to loading and some quiet plinking.
Look forward to hearing about the 180 gns berry's GTK.

 

[PickettSFHunter]

I'm shooting 190 sub-X's out of a 11.5" barrel using H110. You'll really need to chronograph to get your load right where you want it for your set up.

 

[TNlandowner]

For bullet consideration; these bullets open instantly and do a lot of tissue damage at subsonic velocities....

Maker bullets: Projectiles