• Help Support TNDeer:

Clearing 7-10 acres

Westnvol89

Well-Known Member
Joined
Aug 1, 2018
Messages
153
Reaction score
54
I've got 7-10 acres that has grown up in sweet gums that I'd like to clear for bedding cover. The sweet gums are thick in a lot of places and the canopy is closed. Would a dozer be the best bet? Do you have to worry about trees resprouting with a mulcher? Majority of the trees are under 5" diameter
 

Attachments

  • IMG_6616.webp
    IMG_6616.webp
    299.5 KB · Views: 1
  • IMG_6618.webp
    IMG_6618.webp
    192.5 KB · Views: 1
  • IMG_6565.webp
    IMG_6565.webp
    500.2 KB · Views: 1
I'd be hesitant to doze. I've got a property near me and their place is a wasteland years after dozing due to damage to topsoil. What my forester and biologist recommended for my property was to take down everything over 2 inches and drop everything else to the ground with a chainsaw and leave it. At 5 in you might be able to get some with a clearing saw if they're not too tall and heavy.
 
Last edited:
A dozer will be more thorough and faster and you will have brush piles to burn. End results depends on the operator and his ability to regrade after uprooting most of that stuff. There will be some cleanup and site prep but ou will be read to plant or leave to the soil bank. there will always be sprouts

A mulcher will leave it looking more nice but every ground off stump will resprout and the bed of mulch will retard much of the seed bank or planted seed till it rots.

sweetgum thickets quickly become wildlife foodless and impassible.

Get prices, check references go the way that best suits you and then go buy some brush killer for the resprouts.
 
I hate sweetgum trees! They are all over my property. They are one of the hardest trees to push down with a dozer once they get about 12" in diameter. There root system is really tough! I had to cut 4ft deep all around one that was 18" diameter. Ended up building a big ramp to drive the dozer up and raised the blade all the way up and angled it to push with the point of the edge of the blade. It touched the tree about 12 feet off the ground. Once I finally got it going it started to fall over and go down. I've only got a case 450c, so a bigger dozer would probably do a faster job . 5" trees would be be alot easier to deal with.
 
I've got a similar situation in an overgrown pasture, but it's mostly ash and box elder with a few scattered Bradford pears. If I let it go much longer, it's gonna become a closed canopy wasteland. I've wondered about having it sprayed with a drone and getting on a burn schedule.
 
Back
Top