• Help Support TNDeer:

For Sale Marlin 336CS 30-30

EastTNHunter

EastTNHunter

Well-Known Member
TNDeer Supporter
2-Step Enabled
Joined
Mar 8, 2010
Messages
10,122
Location
Rhea Co., TN
Location
Dayton
I'll start off by saying that unfortunately someone put the rear sling stud through the bullseye, but otherwise this thing is in really good shape overall. I am not the original owner, and traded it from another TNDEER member. Also, please don't make fun of my messy reloading bench.

Original buckhorn sights still installed, but I purchased and installed the Williams Ace in the Hole scope base. I have the rear sight and 2 front fiber optic sights for it that will be included.

It seems to shoot 170s best, and the scope is currently sighted in for those, but haven't spent a ton of range time with it. The elevations for different weights (130s and 150s) are on the tape on the buttstock.

$700 for gun, scope base/sights, and a box of 170gr ammo. Will leave scope (Luepold VX3i 1.5-5x20) on it for $300 more
 

Attachments

  • IMG_4751.webp
    IMG_4751.webp
    182.4 KB · Views: 1
  • IMG_4752.webp
    IMG_4752.webp
    162.2 KB · Views: 1
  • IMG_4755.webp
    IMG_4755.webp
    177.6 KB · Views: 1
  • IMG_4754.webp
    IMG_4754.webp
    193.7 KB · Views: 1
  • IMG_4753.webp
    IMG_4753.webp
    170.3 KB · Views: 1
  • IMG_4756.webp
    IMG_4756.webp
    162.8 KB · Views: 1
  • IMG_4757.webp
    IMG_4757.webp
    177.1 KB · Views: 1
  • IMG_4758.webp
    IMG_4758.webp
    148.7 KB · Views: 1
After reading this ad again and knowing EastTNHunter - sounds like this rig is ready to hunt. He is about as precision as it gets - this is a pay / pick it up and go hunting setup. Good luck with the sale!
 
7mm08 said:
That bullseye can be replaced and sling retapped for the purist.

Great rifles……

GLWS
AND HEY , don't I owe a box of shells for the Sooners not making the playoffs?
Click to expand...
Thank you, but if you owe me a box of shells then I don't remember it 🤣

ETA: I'll be danged, it wasn't me that you owed it to though
P

Thread 'Vols are getting a lot of love!'

Pate and McElroy both are very high after Saturday night.

It's surreal.
  • Like
 
Last edited:
I've always seen the plugged hole or whatever those are in the bottom of the stock, near where the sling mount goes.
Is that what ya are calling a bullseye?
 
Carlos said:
I've always seen the plugged hole or whatever those are in the bottom of the stock, near where the sling mount goes.
Is that what ya are calling a bullseye?
Click to expand...
That bullseye is like a trademark on the Marlin stock. People sometimes think it is the spot they should add their sling post and do....but they should not.

Does anyone know if Marlin ever provided factory sling studs on a 336?
 
EastTNHunter said:
I'll start off by saying that unfortunately someone put the rear sling stud through the bullseye, but otherwise this thing is in really good shape overall. I am not the original owner, and traded it from another TNDEER member. Also, please don't make fun of my messy reloading bench.

Original buckhorn sights still installed, but I purchased and installed the Williams Ace in the Hole scope base. I have the rear sight and 2 front fiber optic sights for it that will be included.

It seems to shoot 170s best, and the scope is currently sighted in for those, but haven't spent a ton of range time with it. The elevations for different weights (130s and 150s) are on the tape on the buttstock.

$700 for gun, scope base/sights, and a box of 170gr ammo. Will leave scope (Luepold VX3i 1.5-5x20) on it for $300 more
Click to expand...
What's your bottom dollar without scope ?
 

Latest posts

Back
Top