• Help Support TNDeer:

Muzzleloader Federal B.O.R. Loc REVIEW.

Jcalder said:
What is so wrong with sabots. Or even pistol bullets. The xtp at the speeds you posted are an absolute killer.
Click to expand...
I have not witnessed that to be true. I've seen (on the clubs I work for) a TON of deer lost to saboted pistol bullets. Now maybe it's the lack of shooting skill of the hunters. Very possible. But I/we have never lost a deer to a 50-caliber chunk of lead.
 
BSK said:
I have not witnessed that to be true. I've seen (on the clubs I work for) a TON of deer lost to saboted pistol bullets. Now maybe it's the lack of shooting skill of the hunters. Very possible. But I/we have never lost a deer to a 50-caliber chunk of lead.
Click to expand...
The sabot isn't the problem, and neither are the pistol bullets.

But give a Parker BE a try with a sabot.
 
I have found the federal bor loc 270gr to be accurate. Only problem of accuracy I have found has been when the bullet wasn't fully seated in the bore. Other than that they have been accurate on paper. I just can't shot a deer with it yet. This year hopefully I will test it.
 
BSK said:
Sabots of any type are a no-go for me or any of the other hunters in my group.
Click to expand...
I'm with you, but the post on 325 gr FTX has me intrigued. But if I can help it I'll never shoot a sabot.
I'm also not a fan of the new long range bullets although never shot them, I'm just not a fan.
Especially with a 2 week season.
 
Ladys man said:
I'm with you, but the post on 325 gr FTX has me intrigued. But if I can help it I'll never shoot a sabot.
I'm also not a fan of the new long range bullets although never shot them, I'm just not a fan.
Especially with a 2 week season.
Click to expand...
Been using the 325 FTX and orange MMPs for years. More cost effective than blister packs of ML branded stuff, and super effective on game.

Another thing to consider if you want to go full bore is getting a Lee mould and casting your own. Not hard to do, and Lee moulds aren't expensive
 
mike243 said:
Your going to hate 777 due to powder fowling and reloading with sabots,I only ever had 1 deer go more than 50ft with a 295 powerbelt, most fall right there but I only shoot for heart/lung shots and you can pour the lungs out, I have had some pass throughs but that's not always the case, I had very little problems reloading PB, 209 load all day just clean well like normal and easy loading.
Click to expand...
I agree with the 295, I never had deer travel more than 30 yds so blood trailing was never an issue but if that shot ever does happen I would like that possibility, also getting my son into muzzle loading next yr. He is 8 this yr. So I need that possibility of both holes. But I am concerned with lower powder charges.
 
BSK said:
I have not witnessed that to be true. I've seen (on the clubs I work for) a TON of deer lost to saboted pistol bullets. Now maybe it's the lack of shooting skill of the hunters. Very possible. But I/we have never lost a deer to a 50-caliber chunk of lead.
Click to expand...
Definitely the shooters fault, none of them lost were through the boiler room , no matter what the shooter says
 
Don't worry about lower speed, a stout bullet is more apt to pass through at low velocity due to less expansion., my brother shot a bunch with heavy Buffaloe bullets with 50g of Pyrodex many years ago. keep the shots low in the chest cavity so it doesn't have to fill up with blood before it pours out.
 
BSK said:
I used MaxiBalls for years and years. Loved their performance on the range and on deer, EXCEPT how hard they are to get down the barrel. I've literally had to pound a second shot down the barrel with anything at hand, or ram the ramrod against the tree I'm in to get them to go down a fowled barrel. If it wasn't for the difficulty of loading in a fowled barrel (and even a clean barrel for that matter) I would still be using them.
Click to expand...

Do you use the pre-lubed ones? I've not had a problem with them. I've used a couple of black powder substitutes but never black powder - don't know if that matters. Or maybe this is one of those "personal" differences between muzzleloaders.

I can't imagine what my frustration would be if had a round stuck part way in the barrel.
 

Latest posts

Back
Top