peep sight help needed

[southernhunter]

i have a pse xs the short one "29 inches ata" since i bought the bow new i have never been able to see my whole sight , at first i could only see one pin at a time , so i went to a large 1/4 peep, that help but i still couldnt see all 4 pins,so i went to a extened sight "advice from bow shop" again it helped alittle but still i cant see the sight outter ring, while shooting to day i noticed that at full draw the peep lines up straight with the pins but is angled down and i am seeing the rubber tube on top of the peep. why i havent noticed this till now i am not sure but the bow shop hasnt noticed it in the many trips i have been down there either .. so i guess i am asking is this normal ? does it have anything to do with the steep angle of the string on the short bow ? and how can i slove this issue if there is one ?? thanks

 

[StalkingWolf]

Take it off. I haven't had one for at least 15 yrs.

 

[southernhunter]

Do u still use sights ?

 

[Smoked]

I have the same bow and had the same problem with the factory peep. Changed mine just like you to a larger peep and had same results. I replaced mine with a G5 Meta peep and that solved it.

 

[southernhunter]

thanks for the info smoked

 

[muddyboots]

Yea same bow here and went to a Meta peep.

 

[StalkingWolf]

Do u still use sights ?

No, but I shot for years with a single pin and no peep. I shoot fingers and anchor in the corner of my mouth. I have never liked a peep from day one.

 

[old buck 171]

If you feel more comfortable with peep aligner,use it.Just use a separate peep and aligner and use 1/4 inch of serving between the two.This should give you a better sight picture.

 

[booth]

Dump the rubber tube and like others have said the meta peep is a good one.

 

[Boone 58]

Hmm....i use the ones with the stretch cords because i like to ensure it will be straight and have had excellent results with them and i too use the larger aperture ones for that reason. Try them?