I have a 223,243,270,350 legend all with 5/8-24 thread, can i buy a supressir that covers all these? I know absolutely nothing about them, thanks
Supressor question
- Thread starter knightrider
- Start date
infoman jr.
Well-Known Member
The .350 is going to throw a wrench in things. Otherwise you could buy a .30 cal can and shoot the other 3.
A Silencerco Omega 36M would cover it, but I would prefer a couple of different cans. You will need various HUB mounts to make it work on that wide of a variety of calibers.
- Joined
- Jul 16, 2015
- Messages
- 3,308
- Reaction score
- 3,490
The omega 36m comes with a Charlie asr mount so all he would need is a charlie asr direct thread mount 5/8-24
Charlie Direct Thread Mount
The Charlie Direct Thread Mount is the simple suppressor mounting solution for almost any firearm. Compatible with a number of SilencerCo Suppressors...
silencerco.com
The beauty of the omega 36m is that the front 1/3 can be removed to make it shorter if needed. I have an omega 46m that I use on my 40 and 45 sml's along with a 338 lapua.
Some other options are :
If your barrels are 16" or longer then the YHM R9 is a good all around can.
If barrels are shorter then 16" then the Dead Air Wolfman.
If your barrels are 16" or longer then the YHM R9 is a good all around can.
If barrels are shorter then 16" then the Dead Air Wolfman.
- Joined
- Jul 16, 2015
- Messages
- 3,308
- Reaction score
- 3,490
While we are on the subject of choosing a suppressor, be mindful of the ratings on them. I have a hybrid 46M that I use on my 45 cal smokeless muzzleloaders, 40 cal sml's and anything else 46 cal or below for that matter. It has performed well.
Recently, a new hybrid 46 (not the magnum/automatic rated 46M)
came apart. The shooter and the gun (45 cal sml) were blown off the bench from the concussion. The suppressor can was still attached to the barrel but was completely gutted. It appears the standard hybrid 46 baffles are NOT welded to the can as the hybrid 46M IS. It's my understanding that the hybrid 36M is also welded. I imagine that one of the rear most baffles bent or came loose, blocking the path of escaping gasses. This acted as a plug, which forced the internals out the end cap.
Recently, a new hybrid 46 (not the magnum/automatic rated 46M)
came apart. The shooter and the gun (45 cal sml) were blown off the bench from the concussion. The suppressor can was still attached to the barrel but was completely gutted. It appears the standard hybrid 46 baffles are NOT welded to the can as the hybrid 46M IS. It's my understanding that the hybrid 36M is also welded. I imagine that one of the rear most baffles bent or came loose, blocking the path of escaping gasses. This acted as a plug, which forced the internals out the end cap.
Last edited:
I have a hybrid 46 I use on these same calibers! Works great! I have different end caps to cover the less than 30 cal stuff to get em a little quieter!
