- Location
- Murfreesboro
I am selling a like new Winchester Model 70 Super Grade .243
I am including the Rifle, a Leupold VX-2, 3-9X40 GLOSS (Can't get those anymore), Leupold base, and rings that is a Quick Release System (QR) also in gloss, Butler Creek flip up caps, 80 rounds of Federal Non-Typical Whitetail 100 grain soft point, and I'm including the empty brass from the 40 rounds I fired in case someone reloads, a Plano case, and I think I have the original box.
I'm the original owner of this rifle, I bought it new December 2017. I have had it out exactly one time. I shot 40 rounds of ammo doing a barrel break in, and started dialing the scope in. But it was too hot out, so I quit.
This Winchester Model 70 Super Grade features Controlled Round Feed w/ a Giant Claw Extractor the Most Positive Bolt Action System Ever Invented. This is what made the "pre-64" so desirable.
M.O.A. Trigger System: Smooth, Crisp Pull that is User- Adjustable Between 3 to 5 lbs
Grade IV/V American Monte Carlo Walnut Stock: Cut Checkering with Pachmayr Recoil Pad
Three Position Safety- is Easily Accessible and Allows the Shooter to Quickly and Safely Load or Unload the Weapon
Jeweled Bolt Body w/ Knurled Handle
Finish: Polish Blued
Trigger Finish: Brushed Polish
Trigger Material: Stainless Steel
Trigger Guard Material: Steel
Trigger Guard Engraving: None
Steel: Carbon
Barrel: Free- Floated Hammer Forged 22"
Twist Rate: 10"
Barrel Contour: Sporter
Barrel Finish: High Gloss
Chamber Finish: Polished
Bolt Slide Finish: Jeweled
Overall Length: 42 1/4"
Length of Pull: 13 3/4"
Drop at Comb: 1/2"
Drop at Heel: 1/2"
Stock Material: Black Walnut
Wood Grade: Grade V/VI
Stock Finish: Satin
Checkering: Cut 20 LPI
Pistol Grip Cap: Gloss Blued Steel
Recoil Pad: Pachmayr Decelerator
Sling Swivel Studs: Steel Integral
Magazine Capacity: 5
Magazine Type: Hinged Floorplate
Floor Plate Material: Steel
Drilled and Tapped for Scope: Yes
Weight: 7 lbs 12 oz
$2000 for everything Cash/Trade in Murfreesboro. ID showing TN resident and 21 or over required.
$1500 bare rifle only. No Scope, base, rings, ammo, etc.
[EDIT] I think I have found a .22, but I'm still possibly open to a trade. But I need to clarify a little bit. I'm not going to trade this rifle for a rimfire without cash coming my way also. Most of the .22's I'm looking at are in the $500 to $800 range. While I know there are rimfires that cost far more, that's not what I'm interested in.
TRADES: First let me say, I won't put a value on your trade, I can't without having it in my hands. So please DIRECT MESSAGE me the terms you have in mind. If you have something you think I might be interested in, shoot me a PM with a description and your terms of the trade. Really no need to do pictures until we see if we are in the same ballpark.
I'm interested in a target .22 LR. I'm not looking for a collectable (it may be considered a collectable, but that is not my main concern). My requirements are, it must be American Made, a bolt action (I already have a semi) .22LR, I'm not interested in any other caliber. I would like magazine fed. I might be interested in tube fed, but probably not. Not interested at all in a single shot. For my purposes it must be in very good to excellent condition with an excellent bore and chamber.
This isn't a complete list by any means, but here's examples of what I've been looking at:
Winchester Model 52
Remington 40X, Remington M540X Target, 541 X TARGET, 541-T
Kimber Model 82 Government
I am including the Rifle, a Leupold VX-2, 3-9X40 GLOSS (Can't get those anymore), Leupold base, and rings that is a Quick Release System (QR) also in gloss, Butler Creek flip up caps, 80 rounds of Federal Non-Typical Whitetail 100 grain soft point, and I'm including the empty brass from the 40 rounds I fired in case someone reloads, a Plano case, and I think I have the original box.
I'm the original owner of this rifle, I bought it new December 2017. I have had it out exactly one time. I shot 40 rounds of ammo doing a barrel break in, and started dialing the scope in. But it was too hot out, so I quit.
This Winchester Model 70 Super Grade features Controlled Round Feed w/ a Giant Claw Extractor the Most Positive Bolt Action System Ever Invented. This is what made the "pre-64" so desirable.
M.O.A. Trigger System: Smooth, Crisp Pull that is User- Adjustable Between 3 to 5 lbs
Grade IV/V American Monte Carlo Walnut Stock: Cut Checkering with Pachmayr Recoil Pad
Three Position Safety- is Easily Accessible and Allows the Shooter to Quickly and Safely Load or Unload the Weapon
Jeweled Bolt Body w/ Knurled Handle
Finish: Polish Blued
Trigger Finish: Brushed Polish
Trigger Material: Stainless Steel
Trigger Guard Material: Steel
Trigger Guard Engraving: None
Steel: Carbon
Barrel: Free- Floated Hammer Forged 22"
Twist Rate: 10"
Barrel Contour: Sporter
Barrel Finish: High Gloss
Chamber Finish: Polished
Bolt Slide Finish: Jeweled
Overall Length: 42 1/4"
Length of Pull: 13 3/4"
Drop at Comb: 1/2"
Drop at Heel: 1/2"
Stock Material: Black Walnut
Wood Grade: Grade V/VI
Stock Finish: Satin
Checkering: Cut 20 LPI
Pistol Grip Cap: Gloss Blued Steel
Recoil Pad: Pachmayr Decelerator
Sling Swivel Studs: Steel Integral
Magazine Capacity: 5
Magazine Type: Hinged Floorplate
Floor Plate Material: Steel
Drilled and Tapped for Scope: Yes
Weight: 7 lbs 12 oz
$2000 for everything Cash/Trade in Murfreesboro. ID showing TN resident and 21 or over required.
$1500 bare rifle only. No Scope, base, rings, ammo, etc.
[EDIT] I think I have found a .22, but I'm still possibly open to a trade. But I need to clarify a little bit. I'm not going to trade this rifle for a rimfire without cash coming my way also. Most of the .22's I'm looking at are in the $500 to $800 range. While I know there are rimfires that cost far more, that's not what I'm interested in.
TRADES: First let me say, I won't put a value on your trade, I can't without having it in my hands. So please DIRECT MESSAGE me the terms you have in mind. If you have something you think I might be interested in, shoot me a PM with a description and your terms of the trade. Really no need to do pictures until we see if we are in the same ballpark.
I'm interested in a target .22 LR. I'm not looking for a collectable (it may be considered a collectable, but that is not my main concern). My requirements are, it must be American Made, a bolt action (I already have a semi) .22LR, I'm not interested in any other caliber. I would like magazine fed. I might be interested in tube fed, but probably not. Not interested at all in a single shot. For my purposes it must be in very good to excellent condition with an excellent bore and chamber.
This isn't a complete list by any means, but here's examples of what I've been looking at:
Winchester Model 52
Remington 40X, Remington M540X Target, 541 X TARGET, 541-T
Kimber Model 82 Government
Last edited:
