• Help Support TNDeer:

HHA sight

O

ohio state

Well-Known Member
Joined
Aug 13, 2008
Messages
86
Reaction score
0
Location
helenwood tn
been haveing trouble with my HHA sight.. my 20 yard pin is low than the 30 and 40. was thanking that it is a left hand sight.. does some body got a left hand HHA sight????
Picture197.jpg
if it was a left hand sight the NAME HHA wood be up side down???
Picture199.jpg
this pic show's the sight mark's look at the top where the needle is. the bottom ink pin mark is 20. and 40 yard mark is under the needle .. any idea's?? thanks WORM
 
Its a right hand sight. The pin would come down from the top if it was a left hand on a right hand bow. I am not exactly sure what you are asking. The 20 will be below the 40. When you raise the needle it will lower the pin making you raise the bow on longer shots. If you are talking about the needle being so high on the sight for your 20 yard pin unscrew the pin housing and move it down a few holes. That should put your 20 closer to the bottom and give you more room for farther yardages.
 
my sight you half to lower the sight to get it sighted in at 40 yards ??? i' had the sight in the middle and the bottom hole's.. the black marks is fore the bottom hole's thanks fore the help WORM
 
When you say you have to lower the sight, do you mean you have to lower the pin or you have to lower the needle. If I am understanding you right, the mark the needle is on is 40 and the make below it is 20. Which is how it should be. The 20 will be under the 40 on the tape. If you have it on 20 the pin will have to lower to go to 40.
 
the needle. got a few pic .. this is what it will look like on my sight
IMG_0794.jpg
i' has thanking it should look like this
IMG_0795.jpg
thanks fore the help WORM
 
That's just the way they work. I had one and hated it, but I don't see how they could work any other way. Mine worked flawlessly, but I didn't like it for hunting.
 

Latest posts

Back
Top