-
Help Support TNDeer:
What did you do today in the reloading room?
- Thread starter Deerhunter
- Start date
Reloaded and shot first .223 REM with AA2460 in a Wylde Barrel at a shorter 2.200" COAL… absolutely gorgeous groups, stabilizes w/ no tumbling, with suppressor it gave me chills and smiles with how worth it reloading is.
Fantastic! I keep saying to myself that I'm getting a can but can't get off my can to get the ball rolling! LOL
Little steps for sure! It's only the second time I've been able to sit down at the bench this year!
Ended up getting the remainder of that lot of pull down primed Hornady brass loaded, 85 cases. Loaded the 15 up with my proven load using Superformance powder and 140 gr ELD-Ms and they performed the same as my fireformed cases. I had measured the shoulders of the new cases and they were within .001" of my sized cases so I was hopeful they would be close performance wise, and they were. I was really happy to see these group sizes at distance once I tested close in at 100.
I've gone to 3/4 oz 12ga for skeet and doves too. Works fine plus low recoil not to mention $. I'm like u, so cheap my family either weeps or just turns away.
The only thing I did at the reloading bench was make a cursory inspection. Making sure the two very small grandsons that were down there hadn't messed with anything! They hadn't, everything was fine.
fairchaser
Well-Known Member
Post shoot analysis after the Sierra Cup this weekend. The first day I shot pretty good for me anyway. I was 7th. Day 2 my gun started shooting tall and it was either an X or 9 out the top or bottom. I dropped 7 points on each match and finished mid pack. I measured the seating depth on the ammo I brought back and found 6 of 42 had shorter depths of a couple thousands. I'm thinking the 5 hour drive had something to do with that. Anyway, hard lesson learned. Next time pack all my ammo in padded cases.
I've definitely heard of that happening, and why some shooters will load long and seat to depth when they get to their destination. Got any pics of the event buddy?
fairchaser
Well-Known Member
Looks like a heckuva turn out!
Recently picked up 250 pieces of once fired 50AE for one of my Desert Eagles. Today started the resizing/depriming process. Then they need the case mouths expanded and finally off to the tumbler with the stainless steel pins.
jakeway
Well-Known Member
Finished loading up my 45 Colt and 38 Special loads for the SASS Tennessee State Cowboy Action Championships. They start tomorrow through Saturday in Wartrace, TN. We have 225 registered shooters from 17 different states, including Arizona and New York.
If you want to see some Cowboy Action shooting at its finest, come on over to Wartrace and check us out.
If you want to see some Cowboy Action shooting at its finest, come on over to Wartrace and check us out.
backyardtndeer
Well-Known Member
Looked yesterday at my mess and tried figuring out what I can do for more shelves to get more off the benchtop. I need to spend a couple hours reorganizing again, just don't have enough storage space dedicated to everything.
fairchaser
Well-Known Member
The super trickler is awesome. I pulled some bullets and checked the powder weights after the Sierra Cup and everyone was dead on.
That thing is FANCY!!!! So question, did you crimp AND the bumpy car ride knocked them down a smidge!?
fairchaser
Well-Known Member
I run about 2 thousands of neck tension, no crimp. I had 200 rounds in a protected case and 200 in regular ammo boxes. The bullets that settled were in the regular ammo box. Not all settled but about 15% apparently did. Looks like they settled about 2 thousands. My vertical on those went from 1/2 MOA to 1 MOA. That's enough to put you in the 9 ring. This is a game of fine details!
Midway finally got some forester micrometer seating does for 280ai in. I have one for 6.5 and really like using it. Lookin forward to it coming in and gettin back to the bench.
DaveB
Well-Known Member
500 9's so far.
Scheduled to close out inventory before Monday. We have a bunch more to go. Might be next friday since I just counted.
Got some 223 staged for the auto press. Gonna go very slow. have 4,000+ to reach end of inventory.
Need to load A-bond 140's for our 280.
Need a few A-bond 150's for my 06
Loading out our 308's. Should be done by 7/4
Got 300 7mm08 to finish and then wrap for gift. About same number of A-bond 130's for Rem 770 then wrap.
Inbetween gotta get seeds in ground on Fayette property. Busy summer
Scheduled to close out inventory before Monday. We have a bunch more to go. Might be next friday since I just counted.
Got some 223 staged for the auto press. Gonna go very slow. have 4,000+ to reach end of inventory.
Need to load A-bond 140's for our 280.
Need a few A-bond 150's for my 06
Loading out our 308's. Should be done by 7/4
Got 300 7mm08 to finish and then wrap for gift. About same number of A-bond 130's for Rem 770 then wrap.
Inbetween gotta get seeds in ground on Fayette property. Busy summer
