I've actually not loaded any in awhile but, did seat some Lee TC 230 gr. a little deeper. I had about 100 rounds loaded at 1.200" overall length. 1 or 2 out of a magazine would fail to chamber. I seated some of them to 1.190" and it seemed to work. Only .010" deeper but, 16 rounds chambered and fired fine.
-
Help Support TNDeer:
What did you do today in the reloading room?
- Thread starter Deerhunter
- Start date
DaveB
Well-Known Member
This was a few weeks back.....
Acquired 70 grain Accubond in .224 caliber.
Price was at edge of my tolerance-decision level but I wanted them badly.
Acquired 150 grain Accubond in .308 caliber.
Again, price was at edge of my tolerance-decision level but these are what we shoot (exclusively) in 4 bolt guns and we were down to the nubbin in inventory. At least the price was best I had seen in long time plus there were no quantity restrictions.
Acquired 70 grain Accubond in .224 caliber.
Price was at edge of my tolerance-decision level but I wanted them badly.
Acquired 150 grain Accubond in .308 caliber.
Again, price was at edge of my tolerance-decision level but these are what we shoot (exclusively) in 4 bolt guns and we were down to the nubbin in inventory. At least the price was best I had seen in long time plus there were no quantity restrictions.
east_tn_gk
Well-Known Member
Put together some test rounds for a new 30-06 load.
Ramshot Big Game with Hornady SST 150 gr. Starting at 50.7 gr powder.
Have had issues finding H4895 so I picked up a pound of the Ramshot. Interested to see the results.
Ramshot Big Game with Hornady SST 150 gr. Starting at 50.7 gr powder.
Have had issues finding H4895 so I picked up a pound of the Ramshot. Interested to see the results.
Loaded up the last of my 1 oz Lee slugs after finding a powder and wad combination that worked well. Using 1 oz lead shot data was hit or miss, some poor crimps and a couple of bloopers. Finally found a Green Dot load that works very well with a 12S0 wad. Trying to find a winning combination for the 7/8 oz slugs now. Also loaded up the last of my 170 gr Sierra FMJ silhouette bullets in .357 mag after finding a good charge of WC820 pull down.
fairchaser
Well-Known Member
Dropping powder and seating bullets. N150 and 200.20x Berger's for a match this weekend.
Some serious tech working there. I used to hunt with a guy that used a lee loader in the field to reload. Both ends of the spectrum.
Good luck buddy!
Been awhile since I've loaded anything. I got some 150gn silver tips not long ago from a member and want to see if they fly as good as the BT for my 280ai. Loaded up 5 at 59.5, 5 at 59.8 and 10 at 60gns. 60 gms 4831sc with 150 BT's is the magic load to date. Next on agenda is 100 Barnes 110 tac-tx over h-110 for the 300bo. Looking forward to some range therapy soon.
Attachments
DaveB
Well-Known Member
Loading for my 300 WSM, 7mm08, 22-250, 223 bolt.
Range day tomorrow early early early morning. 2 rifles with new glass to get zeroed.
Range day tomorrow early early early morning. 2 rifles with new glass to get zeroed.
Not really from today but from earlier this week. I have a grandson who informed me that he wants to try deer hunting. He has a brand new Browning A- bolt 308 win that I sold his dad 20 years ago. Scope is boresighted but rifle was never even sighted in! Anyway I rounded up all kinds of used 308 brass that I had. Using a variety of powders I loaded up a variety of 150 grain ballistic tips. Got to get that boy to the range and let him practice a little, after it is sighted in that is.
Where did those come from?
Midway
Factory Second 22 Cal (224 Diameter) Bullets 75 Grain Spitzer
MidwayUSA has just made a huge purchase of blemished bullets and we are passing the savings to our customers. Blemished bullets are bulk-packaged,...
www.midwayusa.com
Initial results are not good, back to the drawing board, lol.
Not the reloading room per say, but I did find a way to make the bolt on my Salvage AxisII suck slightly less.
I bought a $15 knob from eBay, gassed up my 4" cutter and my bench grinder, then ran a 5/16x24 die over it. It feels like a little poopie turd instead of a big giant turd now.
I bought a $15 knob from eBay, gassed up my 4" cutter and my bench grinder, then ran a 5/16x24 die over it. It feels like a little poopie turd instead of a big giant turd now.
Attachments
PickettSFHunter
Well-Known Member
I've been loading 6ARC with 90 grain Sierra Tipped Gamechangers as fast as I can get brass. AA2520 for powder. That combo is shooting very well for me and performing well on hogs.
A little black spray paint on the handle to match the knob and that sucker will look just fine!
- Joined
- Dec 23, 2018
- Messages
- 39
I started getting everything together to sell. Health is failing and I've got more loaded than I'll ever shoot. Can't believe how much Ive got.
