ADR
Well-Known Member
While I'm not Larrys biggest fan, these might help you out
https://www.midwayusa.com/product/1010537258?pid=324442
What did you do today in the reloading room?
- Thread starter Deerhunter
- Start date
https://www.midwayusa.com/product/1010537258?pid=324442
fullstream
Well-Known Member
Wiley
Well-Known Member
I've shot quite a few of these and they do a great job on deer. I prefer the boat tail version over these but both give me excellent accuracy and are deadly on deer.While I'm not Larrys biggest fan, these might help you out
Speer Hot-Cor Bullets 30 Cal (308 Diameter) 165 Grain Spitzer Box of
Perfect for those long range shots, the Speer Hot-Cor Spitzer has a higher ballistic coefficient and are designed to retain velocity over distance. This...www.midwayusa.com
farm208
Active Member
Full stream I'd like to buy them from you but I'm new on here and must get 50 posts before I can buy or sell
No, you can buy or sell, just can't post in the classifieds.
backyardtndeer
Well-Known Member
Ran my prepped 243 brass through the wet tumbler without pins to wash away any brass shavings from trimming and chamfering and deburring. Set out to dry.
Cleaned my little 223 that I finished building not too long back, then shot about 40 rounds through it. Pretty happy with the accuracy. Tried running some through the chrono, but ran into some issues, wasn't much wind but guess what little there was kept causing errors and my phone app wouldn't sync. Figured out my mic permission for the app was shut off after I came in.
Cleaned my little 223 that I finished building not too long back, then shot about 40 rounds through it. Pretty happy with the accuracy. Tried running some through the chrono, but ran into some issues, wasn't much wind but guess what little there was kept causing errors and my phone app wouldn't sync. Figured out my mic permission for the app was shut off after I came in.
I put the starline cases out on a towel in the sun to dry further. Still has some water inside the cases.
Excellent idea buddy! Think I'll get one then!
PickettSFHunter
Well-Known Member
Made a back order on 250 Starline 300 BLK brass, it came yesterday within a week of ordering! Got some work to do now.
fairchaser
Well-Known Member
Deprimed 100 rounds of 308 brass and then annealed with my homemade amp annealer after the match this weekend. Next step is wet tumbling.
fullstream
Well-Known Member
If you have any .284's 120, 140 or 160's we can trade. Either way you can have them. Send me a text at 901-232-7870
Steve
Last edited:
farm208
Active Member
farm208
Active Member
Fullstream I'm sending you a text about your nosler b tips
I use a dehydrator to dry brass as well. Works great and there are no water spots either.
PickettSFHunter
Well-Known Member
Did you try sending a PM to the seller, or just try to reply on the thread that's in the classifieds?
backyardtndeer
Well-Known Member
I have a nesco, that I use for jerky. I may pick up some extra trays for it to dedicate to using for brass. Can't see there being any potential contamination to the dehydrator itself, or is there?
I know of no reason why there would be. For my experiences, the largest advantage of using a dehydrator rather than simply air drying is the time savings and the lack of water spots when drying like @nso123 said above.
