• Help Support TNDeer:

Need Info from TSS guys

Roost 1":2481b1vx said:
So, are you loading 20, 28, and 410s?
Click to expand...

No just 20. Just reading what was in the list he sent me for the 20. It calls for those sizes in some stuff unless I am totally reading it wrong


Joshua 24:15
"But as for me and my household, we will serve the Lord."


Sent from my phone sucka
 
YEKRUT":1ge4au7y said:
I'd set 7 hulls out and put powder in all, then build your wads with Mylar felt and cork as directed. Put wads in shell, measure shot for all, then buffer, put in overshot card and then roll crimp. It's really easy.
Click to expand...
Great instructions. One thing I would add is to do it while you are not distracted. I put my phone on silent and tell my wife and daughter not to interrupt me while I am loading, which usually takes 30 minutes to an hour tops, depending on how many I am loading up. Good luck, it won't be long before you are helping others roll their own too.
 
REN":2f7pgzaj said:
No just 20. Just reading what was in the list he sent me for the 20. It calls for those sizes in some stuff unless I am totally reading it wrong
Click to expand...
You are correct, 12 GA loads call for 20 GA components and 20 GA loads call for 28 GA, and so on. The smaller components allow them to fit inside the hull/wad combination you are loading.
 
I use a jig saw with no blade against the block I set my shells all in. I vibrate them all down at one time and it works like a boss
 
YEKRUT":2warw02i said:
I use a jig saw with no blade against the block I set my shells all in. I vibrate them all down at one time and it works like a boss
Click to expand...

Hey can you text me a pic and info on your block set up? No hurry just when you get time if you don't mind

615-306-3219 Jaymie


Joshua 24:15
"But as for me and my household, we will serve the Lord."


Sent from my phone sucka
 
Got a few shells from a buddy asking me to try them in my gun. Don't know the set up just they are TSS 8 shot. Only choke I had on hand was a 562 sumtoy and it was super hot as far as core lol.

74c20b2077e6462c73d1890226bb7cc4.jpg



Joshua 24:15
"But as for me and my household, we will serve the Lord."


Sent from my phone sucka
 
REN":3tak8sc6 said:
YEKRUT":3tak8sc6 said:
I use a jig saw with no blade against the block I set my shells all in. I vibrate them all down at one time and it works like a boss
Click to expand...

Hey can you text me a pic and info on your block set up? No hurry just when you get time if you don't mind

615-306-3219 Jaymie


Joshua 24:15
"But as for me and my household, we will serve the Lord."


Sent from my phone sucka
Click to expand...

Just a block of wood that I took a paddle bit to to allow me to sit the shells down into while loading. They are not sitting in the holes here obviously as I had just sealed the ends with fingernail polish.
 
REN: "Hey TNReb... want to split the cost of loading some TSS with me? It's going to be a breeze! We'll figure it all out!"

TNReb: "Sure buddy, that sounds great."

REN: "You owe me $100 for shot."

TNReb: "Grrrr... ok"

REN: "I bought a pound of powder. Can you also pick up a pound of some other powder today?"

TNReb: "Grrrr... ok"

REN: "Hey pal... I can't find the wads we need."

TNReb: "grrrr..."

REN: "Hey friend... I don't have any idea what I'm doing."

TNReb: "GRRRR"


Get your act together REN. These loads aren't going to make themselves! :D
 
What wad you going with? They are going to make the vp90s again in April. What components you need? I may have some.
 
REN":1uyufehv said:
Anyone got some 28gauge felt they can spare?? I found some https://www.trackofthewolf.com/list/item.aspx/174/1 but it doesn't say if it is 1/8 or not. Seems it's sold out everywhere else.


Joshua 24:15
"But as for me and my household, we will serve the Lord."


Sent from my phone sucka
Click to expand...

If you can get 20ga you can trim it to fit.....
 
Tennessee Lead":wveksw5u said:
How are you guys mixing the buffer with the shot?
I watched a video of a guy who rigged up a vibrating system and poured it in until some shot began to surface.
Click to expand...

Roost1 had this big industrial size vibrator that was great for mixing the buffer, even if my wife was standing around waiting for us to finish with it.


"So he cocked both his pistols, spit in the dirt, and walked out in to the street."
 
Roost 1":17mgzy3p said:
REN":17mgzy3p said:
Anyone got some 28gauge felt they can spare?? I found some https://www.trackofthewolf.com/list/item.aspx/174/1 but it doesn't say if it is 1/8 or not. Seems it's sold out everywhere else.


Joshua 24:15
"But as for me and my household, we will serve the Lord."


Sent from my phone sucka
Click to expand...

If you can get 20ga you can trim it to fit.....
Click to expand...

Will do that if I have to but trimming felt sucks and it never cuts right


Joshua 24:15
"But as for me and my household, we will serve the Lord."


Sent from my phone sucka
 
REN":2anfmu1o said:
Anyone got some 28gauge felt they can spare?? I found some https://www.trackofthewolf.com/list/item.aspx/174/1 but it doesn't say if it is 1/8 or not. Seems it's sold out everywhere else.


Joshua 24:15
"But as for me and my household, we will serve the Lord."


Sent from my phone sucka
Click to expand...

This is way we started last summer. Rooster did some backdoor trading to get our components.


"So he cocked both his pistols, spit in the dirt, and walked out in to the street."
 

Latest posts

Back
Top