• Help Support TNDeer:

What did you do today in the reloading room?

Rockhound said:
Loaded 25 rounds of 22 hornet last night, most devilish little rounds I've ever dealt with lol easy enough though, scoop it full of lil gun, seat a 35 gr vmax on top and my little new production ruger will drive tacks.
Click to expand...
A friend of mine had a .22 Hornet about 25 years ago. I think he loaded a 45 gr. with H110.
 
I'm loading up some 95 gr SST's for 6 ARC with leverrevolution. They look goofy with the crimp ring so high but that's at a OAL of 2.250. I hope to test on some hogs soon.
 

Attachments

  • image.webp
    image.webp
    51.7 KB · Views: 1
Finally, planning to load some fresh 30-06 cases today. Recipe will include AA 4350, Remington brass, CCI LR primers and 150 gr NABs. I had a few leftover that had been loaded already with the recalled AA 4350, that was supposed to be ok, if loaded, but apparently that wasn't the "case". I had about 20 or so left and when I got them out the powder had started "working" inside the cases and pressure and corrosion had split the necks and had seaped out, ruining the entire batch. New powder was acquired and I'll be starting almost from scratch once again.
 
No joy on the previously good load recipe for the 06. I'll have to retune this load. I shot some 300 WSM loads that were previously loaded, although a couple years later than the 06 loads, and showing no signs of degrading, and they still perform well. I'm still taking them all down and/or shooting them and starting fresh next season as well tho, bc it's only a matter of time before they degrade as well I'm sure.


300 WSM at 100 .


Screenshot_20241011-112348.webp
 
MUP said:
No joy on the previously good load recipe for the 06. I'll have to retune this load. I shot some 300 WSM loads that were previously loaded, although a couple years later than the 06 loads, and showing no signs of degrading, and they still perform well. I'm still taking them all down and/or shooting them and starting fresh next season as well tho, bc it's only a matter of time before they degrade as well I'm sure.


300 WSM at 100 .


View attachment 246604
Click to expand...


MUP my 06 powder is IMR4350m 59.5 grains (or maybe more) pushes that 150 A-bond or Partition right at 3000 FPS Browning A-Bolt
 
DaveB said:
MUP my 06 powder is IMR4350m 59.5 grains (or maybe more) pushes that 150 A-bond or Partition right at 3000 FPS Browning A-Bolt
Click to expand...
I've never checked the MV of this rifle and load before. The 100 yard velocity seems a little slow, but this load wasn't a barn burner anyway, just fairly accurate. I have plenty of AA 4350 and H4350 for this application too. 👍🏻
 

Latest posts

Back
Top